Parts & Accessories

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

Specialized's WaterGate self-sealing Heart Valve delivers a high rate of flow with a leak-proof design, even when the valve is open, providing a simple drinking experience. - Simple hands-free open and close valve: nothing to turn - 100% leak-proof top locks down for transport or mixing powdered drinks - Rubber over-molded cap for easy grip

The EVOC Bite Valve is a mouthpiece for the drinking tube of your Hydration Bladder. - Self-closing silicone stream valve - Leak-tight seal against escaping liquid - Taste-neutral material for pure flavor

The drip-proof Hip Pack Hydration Bladder 1.5, with its flexible hose and bite valve, is easy to clean and doesn't contain any toxic substances. - Free from BPA and PVC - Leak-proof and easy to fill with Slide Seal - Plug-n-Play allows quick removal of the hose - Volume: 1.5L - Weight: 130g - Measures: 28 x 18 x 1cm

- Leak-proof and easy to fill with SLIDE SEAL - PLUG-N-PLAY allows quick removal of the hose - Free from BPA and PVC

The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 2L - Weight: 130g - Measures: 17 x 32 x 1cm

The BPA- and PVC-free Hydration Bladder 2 Insulated with insulated hose and a 20% increase in water flow lets you lap it up on even the coldest day in the snow. - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Can be filled with hot or cold water (up to 60°C) - Volume: 2L - Weight: 140g - Measures: 17 x 32 x 1cm

The durable Hydration Bladder 3 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 3L - Weight: 140g - Measures: 18 x 42 x 1cm

- Extra-strong magnet keeps the drinking tube in position during your activity. - Two-piece design for attachment to the hip belt, backpack or vest - Fits all EVOC hydration systems (excluding insulated drinking tubes)

• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.

The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

B-RAD Everywhere Base 2

B-RAD Everywhere Base 3

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm

On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.