Cranksets

RaceFace Crank Arm Fixing Bolts - M15

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

The R-Hawk checks all the standard boxes for an all-mountain/enduro crank. Like ROTOR’s REX cranks, the R-Hawk is a work of engineering built on the principles of lightweight and rigid, but R-Hawk’s modular concept offers compatibility that meets – and even exceeds – current trends in mountain bike technology. Crank arms will be available independent of an axle and chainrings; there’s no longer a factory-assembled arm+axle, and both crank arms can be removed from the axle. This way the R-Hawk can be mounted to standard, boost, and downhill axles. - Lightweight, modular 6082 aluminum arms with exceptional stiffness-to-weight ratio, with the ability to handle the demands of enduro and DH - OCP direct mount rings allow the rider to configure to their optimum chainring position for maximum power transfer - Axle spindle, spacer, DM ring, and bottom bracket options are available separately - Due to the inset bore location of the pedal threading, some flat pedals with a large inboard bearing may not be compatible with the crankset or crank boots

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

Replacement spindle spacers for Race Face X-Type FR/DH cranksets.

M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline

Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread

Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair

Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.

- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool

Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

RaceFace CINCH Crank Bolt and Puller Cap Sets.

CINCH Crank Bolt with Washer

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Self-extracting

Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.

RaceFace CINCH Crank Bolt and Puller Cap Sets.

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Not self-extracting

- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles

- Replacement bolt for DUB cranks