Handlebars

The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg

- Ideal handlebar for road and gravel applications - Flat section on the top makes it a comfortable bar for long days in the saddle - Cable routing for the integration of a Di2 bar-end junction box - 198g (42cm) - Maximum rider weight of 220lbs

Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short reach shallow drop geometry and full Di2 compatibility. Who It's For Road riders with a preference for compact geometry, light weight, and refined electronic groupset integration. Why We Made It Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains including compatibility with Shimano RS-EW910 bar end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs.

The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty

The E100 name is not used lightly and represents the culmination of nearly 20 years of creating the highest quality carbon components on the market. The new E100 road bar uses the same critically acclaimed Maximum Contact Drop (MCD) shape as our other premium road bars, with a stiff mid-section and long tails at the end of the drops for optimized ride characteristics and more hand positions. Most ultra-light bars sacrifice stiffness, durability and drop length to save weight, but not Easton's. The E100 bar meets the same rigorous fatigue and impact testing standards as our other road bars and does so as the lightest road bar Easton has ever created — a feathery 178g for a 42cm bar. - Finish: Matte UD Carbon/Ultra Gloss decals - Bar weight: 178g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm - Reach: 80mm - Drop: 125mm - Materials: E100 carbon

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

Flared Adventure and Gravel bar made of EC90 carbon composite - 10 degrees of flare (adds 68mm to bar width at tip of drops) - Ergonomic top section and size-specific shape to optimize strength, weight and ride feel - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 205g @ 42cm (width measured center-to-center)

Flared Adventure and Gravel bar made of EC90 carbon composite - 16 degrees of flare (adds 68mm to bar width at tip of drops) - Each width of bar has a unique diameter and length ergonomic top section - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 208g @ 42cm (width measured center-to-center)

The EC90 SLX is comprised of advanced carbon construction for Easton’s lightest road bar to-date. This handlebar features Easton’s new MCD shape technology for a unique ride quality and comfort. TaperWall technology and Intelligent Flexibility team up to deliver a perfectly tuned bar that weighs just 195-grams. Shimano, SRAM or Campagnolo levers can be positioned for a smooth transition on the tops and into the bend, with cables wrapped neatly in the bar’s designed recesses. - Bar weight: 195mm (42cm) - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC90 carbon

With the EC70 Aero, you'll stay comfortable while reducing drag. Thanks to the flattened top profile with internal cable routing and MCD shape technology, this handlebar provides more comfort during long days in the saddle while cheating the wind. And with Easton’s proven composite TaperWall technology and Intelligent Flexibility, the EC70 SL is nice and light at just 255 grams (42cm). - Weight of 42cm bar (grams): 255 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Flat

Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars. - Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm - Compound flare — 12 degrees at the hoods and 20 degrees through the drops - Drop/Reach: 100mm/68mm - 31.8mm clamp diameter Specifications: - Bar Top Style: Flat - Width Measurement: Center - Bar Clamp Diameter (mm): 31.8 - Accessory Mount Diameter: 31.8 - Bar Reach (mm): 68 - Material: Carbon - Clip-on Compatible: Yes - Bar Drop (mm): 100 - Flare: 20 - Defined Color: Black - Weight: 236 - Drop Bend Style: Compact

Thomson's Carbon Road Handlebars are as light, stiff and strong as they are beautiful. Thomson crafts them of three types of unidirectional Toray carbon, molding them in one piece and putting a mild wing shape on top for a nice platform and support for your hands. And you get the perfect bend for riding in all hand positions with plenty of clearance for your wrists at any bar angle. Plus, there are provisions on the bottom for the cables so you get a tidy tape job and even more comfort.

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range. - FACT carbon construction offers an optimized blend of durability and light overall weight. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach

Contact points—those spots where our bodies meet our bikes—are crucial areas for comfort and control. Get it wrong, and even the best bikes can be miserable to ride. We developed the new Terra handlebar to be the paragon of comfort, control, and performance, with an optimized blend of carbon fiber and advanced construction techniques yielding exceptional ride comfort, precise handling, and class-leading strength at an impressively low weight. A shallow drop and moderate reach combine with a 12-degree flare for optimal all-terrain comfort and control. - Optimized blend of high modulus carbon fiber materials and advanced construction techniques yield a light and confident bar - Ergonomic top perch alleviates pressure on the hands - Bar flared 12 degrees at the drops for added stability - Bend: 103mm drop x 70mm reach

A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)

Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. - Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops) - Flare: 16-degrees - 42cm: 220g - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 120mm - Materials: EC70 carbon

We took our lightest, most comfort-advanced bar – the EC90SLX – and used our second-tier carbon fiber for a more affordable package. The EC70 SL features the same top of the line MCD shape technology for easy position transferring; Taperwall to maintain stiffness while reducing weight; and Intelligent Flexibility for added vibration dampening comfort. It also features recesses for cables and comes in four lengths. The EC70 SL is the full race package deal. - Bar weight: 220g (42cm) - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC70 carbon

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

The No.9 12F Carbon is Whisky’s most versatile drop bar, that’s equally at home on tarmac, gravel, twisty cyclocross courses, and double-track. From touring to racing, this modern bar is a great addition to almost any bike. The comfortable 12-degree flare provides excellent control and comfort, especially off-road or in challenging conditions. A semi-compact design offers seamless transitions between positions, and we’ve made smart updates to improve compatibility with all your favorite drop bar controls. - Unidirectional carbon fiber construction with new carbon layup to better accommodate clamping forces of modern controls - Drop/Reach: 115/68mm

The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.

The No.9 6F Carbon is Whisky's modern racing styled drop bar. It is equally at home on tarmac, gravel or twisty cyclocross courses. From group rides to racing, this bar is a great addition to almost any bike. The comfortable 6-degree flare provides excellent control and comfort with just enough forearm clearance from the drops. This bar features a slightly deeper drop section compared to Whisky's wider flared offerings. The reach is also slightly shorter to compensate for the now-common, longer hydraulic STI levers from many manufacturers. - Unidirectional carbon fiber construction - Measured Center-to-Center at the levers - Drop/Reach: 125/67mm - 6 deg flared drop - Clamping Torque: 5Nm

- Reverse Components flagship handlebar reduces vibrations which can cause fatigue on longer runs over rough terrain\n- Carbon construction with Seismic vibration damping technology\n- Unique carbon laminate process makes a handlebar that is both lightweight and strong \n- Tested extensively at the EFBE laboratory in Germany, a pioneer in DIN 79100 test methods

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation

Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation

The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders. - Includes decal sheet to color match with ENVE wheel decals

Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm