Handlebars

The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg

- Internal routing for Shimano STEPS switch units and tested to the very demanding Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill) - Patented oval bar shape provides increased vertical compliance - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We benchmarked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS - Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up - Weight: 20mm Rise (220g) 35mm Rise (225g) - Max Stem Clamp Width: 65mm - Max Control Torque: 5Nm - Minimum Trim width: 740mm - Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White COMPATIBILITY - Grips with only an outer clamp are not compatible with our bar.

Deity Speedway Handlebars: at 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. Designed for the sweet spot that absorbs maximum vibration, chatter and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed.

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers

Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers

Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

The No.9 12F Carbon is Whisky’s most versatile drop bar, that’s equally at home on tarmac, gravel, twisty cyclocross courses, and double-track. From touring to racing, this modern bar is a great addition to almost any bike. The comfortable 12-degree flare provides excellent control and comfort, especially off-road or in challenging conditions. A semi-compact design offers seamless transitions between positions, and we’ve made smart updates to improve compatibility with all your favorite drop bar controls. - Unidirectional carbon fiber construction with new carbon layup to better accommodate clamping forces of modern controls - Drop/Reach: 115/68mm

The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.

The No.9 6F Carbon is Whisky's modern racing styled drop bar. It is equally at home on tarmac, gravel or twisty cyclocross courses. From group rides to racing, this bar is a great addition to almost any bike. The comfortable 6-degree flare provides excellent control and comfort with just enough forearm clearance from the drops. This bar features a slightly deeper drop section compared to Whisky's wider flared offerings. The reach is also slightly shorter to compensate for the now-common, longer hydraulic STI levers from many manufacturers. - Unidirectional carbon fiber construction - Measured Center-to-Center at the levers - Drop/Reach: 125/67mm - 6 deg flared drop - Clamping Torque: 5Nm

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

Ergonomnic and elegant, the Whisky 438 Aluminum Scully Bar brings much needed relief for long hours in the saddle – without compromising reach or stem length. The 23-degree backsweep and 5-degree upsweep create an easy, natural handling position, leaving little room for tricep fatigue. The generous clamping space and clean, lightweight design means this ISO tested bar tastes all types of terrain. For a custom feel, the Scully Bar comes in two trimmable widths (820mm and 780mm) to perfect your grip length and enhance overall performance. 

For the ultimate in comfort and control over long distances, our all-carbon Scully Bar pairs a 5-degree upsweep with a 23-degree backsweep. Featuring an elegant forward bend before sweeping back again, its easy, natural hand position inspires confidence. It’s also blissfully wide, offering loads of real estate up top for mounting lights, bags, bikepacking gear, and more. ISO tested for harsh terrain, the Scully Bar is a sleek and stiff upgrade for paved commutes and whatever off-road riding you’re into — gravel, XC, singletrack, and beyond. Offered with 20mm of rise in two trimmable widths, the ideal fit is out there.

Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars. - Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm - Compound flare — 12 degrees at the hoods and 20 degrees through the drops - Drop/Reach: 100mm/68mm - 31.8mm clamp diameter Specifications: - Bar Top Style: Flat - Width Measurement: Center - Bar Clamp Diameter (mm): 31.8 - Accessory Mount Diameter: 31.8 - Bar Reach (mm): 68 - Material: Carbon - Clip-on Compatible: Yes - Bar Drop (mm): 100 - Flare: 20 - Defined Color: Black - Weight: 236 - Drop Bend Style: Compact

Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g

Flow 40mm Carbon Riser Bar - Created from UD carbon - Stealth black graphics on a matte black over coat - Anti-vibration taper technology for total control

Nail 20mm Carbon Riser Bar - Created from UD carbon - Stealth black graphics on matte black - Anti-vibration taper technology for total control

- Ideal handlebar for road and gravel applications - Flat section on the top makes it a comfortable bar for long days in the saddle - Cable routing for the integration of a Di2 bar-end junction box - 198g (42cm) - Maximum rider weight of 220lbs

- Mild flat section is small enough not to restrict hand movements and allows for angle adjustment - 7000 series aluminum construction that exceeds ISO requirements - Shaping on the bottom side of the top section allows for smooth routing options - Width measured center to center. 230g (40cm)

Thomson's Carbon Road Handlebars are as light, stiff and strong as they are beautiful. Thomson crafts them of three types of unidirectional Toray carbon, molding them in one piece and putting a mild wing shape on top for a nice platform and support for your hands. And you get the perfect bend for riding in all hand positions with plenty of clearance for your wrists at any bar angle. Plus, there are provisions on the bottom for the cables so you get a tidy tape job and even more comfort.

Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.

Thomson MTB Aluminum Handlebar 800mm 35mm Rise 9degree back 5 degree up 35.0 clamp. - Produced from 7050 alloy then butted and tapered for optimal fatigue life - Produced with an advanced hydraulic forming press to ensure consistent wall thickness and exact tolerances - Bar Clamp Diameter: 35.0mm

Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation

Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation

Thomson's Trail bar is 750mm wide with 20mm of rise. The clamping area is 50mm wide, allowing a different bend profile for a more compliant ride. The Trail bar is designed to give you a lightweight aluminum all-around bar no matter your riding style. - Backsweep: 8° - Upsweep: 5° - Material: Aluminum

Cycles Camper Riser Bar - Heat-treated aluminum riser bar - Made by Nitto in Japan

- Steve Potts and the other founders of WTB originated the first "dirt drop" style bar for Specialized back in the late 1980's. Steve Potts designed this modern version with updated fit and function. - Polished aluminum finish in black and silver - Made by Nitto in Japan

A handlebar that can be used for a wide range of purposes, from trail riding to gravel and dirt touring - Numerous possible hand positions offer comfort in all conditions - 80mm reach out front, 72mm backreach - CrMo steel tubing - Made by Nitto in Japan

Specialized Alloy Mini Rise Handlebars area wide handlebar made of premium alloy with a minimal 10mm of rise. - High-strength 7000-series premium aluminum alloy - Rise: 10mm - Width: 750mm and 780mm - Clamp diameter: 31.8mm

Comp Alloy Short Reach Flare Rd Bar from Specialized.

Specialized's Expert Alloy Shallow Bend Handlebar offers the same ergonomic benefits as the S-Works version, delivering a strong and affordable bar with no compromise. - Premium butted aluminum, high-strength design - Ergonomic top perch alleviates pressure on hands; smooth transitions for fit & comfort - Shallow bend drop design: 123mm drop x 75mm reach - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls - Front of bar optimized for dual-cable routing

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. For added stability we've added 12 degrees of flare at the drop to give that wide stance. - Constructed from 6061 Butted Aluminum for a high-strength design. - 15mm rise provides a wider range of fit. - Shallow Bend Drop: 103mm drop x 70mm reach x 12d flare

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Expert Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. - 15mm rise for additional rider fit range. - Constructed from 2014 Premium Butted Aluminum for a high-strength design. - Shallow Bend Drop: 123mm drop x 75mm reach

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range. - FACT carbon construction offers an optimized blend of durability and light overall weight. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach

A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)

- 6061 Premium butted Aluminum, high-strength design. - Short reach for optimal brake/shift control. - Shallow Bend Drop: 125mm drop x 65mm reach

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

For XC racing, stiffness equals speed. That’s what drove our thinking when building the Roval Control SL handlebar. Borrowing inspiration from trail bike tech, we knew a 35mm bar clamp width would give us the rigidity our athletes demanded, and function as the backbone for our ultra-light, hand laid up carbon. It’s light… Like, 185 grams light. But, light-weight and stiffness aren’t the only pieces of the puzzle. Riders also need high-precision control while descending, and a comfortable, sustainable position on grueling climbs. The Roval Control SL’s 780mm width allows you to dial in your perfect size, and it’s World Championship proven geometry gives the confidence to attack any segment. - Material: High modulus carbon fiber - Width: 780mm, includes cut marks to customize width - Rise: 0mm or 20mm - Upsweep: 6 degrees - Backsweep: 8 degrees - Clamp Diameter: 35mm - Weight: 185g

Contact points—those spots where our bodies meet our bikes—are crucial areas for comfort and control. Get it wrong, and even the best bikes can be miserable to ride. We developed the new Terra handlebar to be the paragon of comfort, control, and performance, with an optimized blend of carbon fiber and advanced construction techniques yielding exceptional ride comfort, precise handling, and class-leading strength at an impressively low weight. A shallow drop and moderate reach combine with a 12-degree flare for optimal all-terrain comfort and control. - Optimized blend of high modulus carbon fiber materials and advanced construction techniques yield a light and confident bar - Ergonomic top perch alleviates pressure on the hands - Bar flared 12 degrees at the drops for added stability - Bend: 103mm drop x 70mm reach

- Integrated front extension provides additional hand positions - Designed and intended for all types of drop bar riding - Traditional drop bar shape with no flair to the drops - Lightweight 6061-T6 alloy construction - 439g (42cm)

- Provides extra hand positions for gravel, touring and adventure riding - Bar top features an ergo profile for comfort\n- Moderate 25 degree flare angle - Lightweight 6061-T6 alloy construction - 480g (42cm)

- Features an integrated aero bar that provides additional hand positions - Allows the rider to safely achieve an aero tuck position during long days in the saddle - Can be used with the armrest kit for added comfort (RI2030) - Aluminum construction with 6 degrees of back sweep - 31.8mm bar clamp diameter, 423g

- Inspired by the classic V-Cross BMX bars from the 80's - Constructed from butted 4130 Cro-Mo - 820mm width, can be cut to 720mm if desired

- Constructed from a unique blend of 13 different thicknesses of 4130 CrMo tubing\n- Unique 31.8mm clamping area that is Farr stiffer than the typical 22.2mm clamping area of BMX handlebars \n- Compatible with most 31.8mm stems

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

- Initially designed and built for trials, it soon became apparent this handlebar can serve as a high-rise bar for almost any discipline - Due to its 76mm rise and pleasing 9-degree backsweep, this handlebar affords an upright position that is comfortable enough for leisure and daily commuters - High rise 7050-T6 aluminum bar

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

Double butted 7075-T6 aluminum bar, designed and tested by Reverse Team Rider Lukas Knopf - Inscribed with his mantra - life is short - stunt it - Includes cutting lines and stem alignment guide marks

Double butted 7075-T6 aluminum bar, designed and tested by Freeride legend Nico Vink - Designed for riders who value strength and reliability over light weight - Increased wall thickness to withstand the toughest abuse

- Reverse Components flagship handlebar reduces vibrations which can cause fatigue on longer runs over rough terrain\n- Carbon construction with Seismic vibration damping technology\n- Unique carbon laminate process makes a handlebar that is both lightweight and strong \n- Tested extensively at the EFBE laboratory in Germany, a pioneer in DIN 79100 test methods

Lightweight 6061 aluminum handlebar with extra backsweep makes it possible for kids to change position more quickly, to steer the bike more actively and to support the child in an ergonomic posture on the bike - Designed around smaller shoulder width and arm span of young riders

- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability. - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new