Riser

- Internal routing for Shimano STEPS switch units and tested to the very demanding Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill) - Patented oval bar shape provides increased vertical compliance - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We benchmarked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS - Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up - Weight: 20mm Rise (220g) 35mm Rise (225g) - Max Stem Clamp Width: 65mm - Max Control Torque: 5Nm - Minimum Trim width: 740mm - Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White COMPATIBILITY - Grips with only an outer clamp are not compatible with our bar.

Deity Speedway Handlebars: at 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. Designed for the sweet spot that absorbs maximum vibration, chatter and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed.

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g

Flow 40mm Carbon Riser Bar - Created from UD carbon - Stealth black graphics on a matte black over coat - Anti-vibration taper technology for total control

Nail 20mm Carbon Riser Bar - Created from UD carbon - Stealth black graphics on matte black - Anti-vibration taper technology for total control

Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.

Thomson MTB Aluminum Handlebar 800mm 35mm Rise 9degree back 5 degree up 35.0 clamp. - Produced from 7050 alloy then butted and tapered for optimal fatigue life - Produced with an advanced hydraulic forming press to ensure consistent wall thickness and exact tolerances - Bar Clamp Diameter: 35.0mm

Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation

Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation

Thomson's Trail bar is 750mm wide with 20mm of rise. The clamping area is 50mm wide, allowing a different bend profile for a more compliant ride. The Trail bar is designed to give you a lightweight aluminum all-around bar no matter your riding style. - Backsweep: 8° - Upsweep: 5° - Material: Aluminum

Cycles Camper Riser Bar - Heat-treated aluminum riser bar - Made by Nitto in Japan

Specialized Alloy Mini Rise Handlebars area wide handlebar made of premium alloy with a minimal 10mm of rise. - High-strength 7000-series premium aluminum alloy - Rise: 10mm - Width: 750mm and 780mm - Clamp diameter: 31.8mm

- Inspired by the classic V-Cross BMX bars from the 80's - Constructed from butted 4130 Cro-Mo - 820mm width, can be cut to 720mm if desired

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

- Initially designed and built for trials, it soon became apparent this handlebar can serve as a high-rise bar for almost any discipline - Due to its 76mm rise and pleasing 9-degree backsweep, this handlebar affords an upright position that is comfortable enough for leisure and daily commuters - High rise 7050-T6 aluminum bar

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

Double butted 7075-T6 aluminum bar, designed and tested by Reverse Team Rider Lukas Knopf - Inscribed with his mantra - life is short - stunt it - Includes cutting lines and stem alignment guide marks

Double butted 7075-T6 aluminum bar, designed and tested by Freeride legend Nico Vink - Designed for riders who value strength and reliability over light weight - Increased wall thickness to withstand the toughest abuse

- Reverse Components flagship handlebar reduces vibrations which can cause fatigue on longer runs over rough terrain\n- Carbon construction with Seismic vibration damping technology\n- Unique carbon laminate process makes a handlebar that is both lightweight and strong \n- Tested extensively at the EFBE laboratory in Germany, a pioneer in DIN 79100 test methods

Lightweight 6061 aluminum handlebar with extra backsweep makes it possible for kids to change position more quickly, to steer the bike more actively and to support the child in an ergonomic posture on the bike - Designed around smaller shoulder width and arm span of young riders

- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability. - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid