Accessories

Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

Clean Streak Turbo Bike Chain Degreaser is the quick, no scrub way to remove grease and grime from metal components. This dry-style degreaser features a Jet Sprayer to blast away surface dirt and grime. It’s also perfect for cleaning all hard-to-reach areas. It dries rapidly, requires no water rinsing, and leaves no residue. When used to clean bicycle chains, it prepares the chain for fresh lubricant to be applied. - Use on chains, cassettes, chain rings, & disc brake rotors - Cleans interior & exterior parts of chain - No scrubbing or water rinsing required - Fast drying & leaves no residue - Use outdoors or in a well-ventilated area

Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Free-standing storage bike rack for your home, apartment, or garage. - Freestanding rack for holding up to 2 bikes - Bike hanger arms adjust independently to any height up and down the bike rack - Bike protection with V-Shaped plastic bike holders that fully cushion each bicycle - Very strong steel construction. Holds even the heaviest of bicycles - Dimensions: 21 x 31 x 84 in

The safest and easiest way to travel with your mountain bike, with an integrated work stand for proper assembly and maintenance along the way. - Safely transports almost all mountain bikes, fitting wheelbases up to 130cm and tires up to 29 x 3.0" - Included work stand makes bike maintenance, assembly, and disassembly easier while traveling or at home - Easily fasten the bike to the workstand inside the case for safe and secure transport - Padded interior packing panels are tailored to protect all parts of the bike during transport - Rigid side panels are reinforced with 5mm corrugate polypropylene and a molded HDPE bottom tub provide superior protection - Folding sidewalls collapse and secure tightly for compact storage (just 144 x 38 x 24cm) at the travel destination or at home - Swiveling front wheel makes for effortless maneuvering through airports and can be stored conveniently inside the case at baggage check to ensure the stability of the case when loading or in storage - Brake rotor pockets are located in the optimal packing position and protect rotors from bending stress while traveling - Drivetrain wrap protects rear derailleur, chain, and bike frame from damage while traveling - Work stand fork mount fits all front axle sizes, including 15x110 boost, 15x100, 20x110, 12x100, 9mm quick release

Rear mounted child bike seat providing comfort and style for everyday rides. - Soft and shock-absorbing foam seat that lets your child travel in comfort - Adjustable footrests and footstraps ensure a perfect fit as your child grows - Available in frame, rack, and front versions - The seat can be mounted and dismounted from the bike in seconds with the universal quick-release bracket, making it easy to switch between different bikes - Smooth, comfortable ride for your child due to the DualBeam suspension system that absorbs road shock - Built-in reflector and safety light attachment point for increased visibility - Childproof safety buckle secures your child quickly and easily - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Water-repellent materials make the seat easy to clean and to keep dry - High quality metal lock that secures the child bike seat to your bike included

The soft handlebar padding allows your child to rest their head comfortably during the ride. Features - The head rest attaches easily to the Thule Yepp Mini handlebar

The S2 Rear Cargo Rack is a premium lightweight rack designed specifically for the SUPER73-S2. This versatile rack can carry loads of up to 10 lbs, securable to the S2 aluminum frame, and features integrated passenger handholds. Compatibility: S2

- 5 DART plugs for use with the Stan's NoTubes DART tool

Back by popular demand, the Air Tool MTB Floor Pump is better than ever. Designed for low pressure, high volume tires, it provides precise pressure to ensure that your tires are set up for whatever the trail throws at you. - Oversized 3" (76mm) gauge has 0-40 PSI range for maximum resolution when filling large tires. - Massive 508cc volume aluminum barrel pushes enough air to seat tubeless tires. - Ergonomic Wing handle with pressure relief valve. - Auto selecting SwitchHitter II technology. - Includes spare rubber seal for head. - Max pressure: 40 PSI (2.7bar) - Volume-per-stroke: 508cc

Small, efficient, reliable—the three key features of the Air Tool MTB Mini pump. With the inverted dual chamber design, this pump moves 20% more air per stroke than the unit it replaced, yet is 10% smaller. - Inverted dual chamber design is smaller yet moves 20% more air per stroke when compared to our previous design, reducing pumping time by up to two minutes. - Twist locking head is easily converted to fit Presta or Schrader valves. - Machined outer barrel for extra grip while pumping. - Aluminum inner and outer chamber for durable performance. - Water bottle boss frame mounting bracket included. - Max pressure: 60 PSI (4.1bar) - Volume-per-stroke: 55cc - Water bottle boss frame mounting bracket included.

The Air Tool MTB pump is Speialized's most dependable and durable big-volume frame pump. It's intended to be carried on the bike for use in all off-road conditions. You'll find that it features a new inverted design, so it greatly increases air capacity, which reduces pump time by up to two minutes. - All new inverted, double chamber design increases the air handling capacity by 28% compared to our previous design, reducing pumping time by up to two minutes. - Twist locking head reduces size and can be easily converted to fit Presta or Schrader valves. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 60 PSI (4.1bar) - Volume-per-stroke: 100cc

The best road mini pump does two things well: it inflates tubes quickly and stashes easily. The reliable Air Tool Road Mini pump moves almost twice as much air as its predecessor, thanks to its inverted dual chamber design. It gives you total peace of mind on days when pesky flats catch you off-guard. - Inverted dual chamber design is smaller yet moves 58% more air per stroke when compared to our previous design, reducing pumping time by up to four minutes. - Presta-only head with updated dust cover prevents the pump from opening due to vibration. - Machined outer barrel for extra grip while pumping. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss frame mounting bracket included. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 30cc - Volume-per-stroke: 30cc - Water bottle boss frame mounting bracket included.

Specialized's Air Tool Sport Floor Pump boasts all-steel construction, durable internals, a long hose, a sturdy handle and a three-sided base for easy pumping and excellent stability. You also get Specialized's SwitchHitter head that automatically adapts to fit Presta and Schrader valves, and an easy-to-read, 2-inch gauge to make dialing in the right pressure a breeze.

Replacement LED assembly for the Centro LED helmet.

The DRY-TECH fender set is an engineered fender set with extended, research-based length for superior water protection. The fenders are made of a lightweight, yet highly durable multi-material design. It's also been engineered in Specialized's very own Win Tunnel in order to improve protection and to minimize water spray. The fenders are available in three different sizes (35, 45, and 52mm), and they're designed to work on bikes with 700C wheels—with or without Specialized Plug + Play frame mounting. Lastly, for a finishing touch, the fenders include heat-treated, lightweight aluminum fender stays with stainless steel hardware. - Engineered fender set with extended, research-based length for superior water protection. - Lightweight, yet highly durable multi-material design. - Engineered in Specialized's Win Tunnel to improve protection and minimize water spra.y - Designed to work on bikes with 700C wheels and with or without Specialized Plug + Play frame mounting. - Heat-treated, lightweight aluminum fender stays with stainless steel hardware.

Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts

Want to run your Flux headlight on the latest trail bikes? You're going to need this mount for your 35mm cockpit. - Quick-release extruded aluminum handlebar clamp. - Clamp fits 35.0mm handelbars.

The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).

These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

Tool-less, 3-position training wheel installation/removal system. - Closed-cell foam tires - Tubular steel arms - Compatible with 2013-present Hotrock 20-inch models only

Our best-selling bottle, the Little Big Mouth 22oz Bottle takes a revolutionary design and shrinks it down a bit. It's conveniently shaped and absolutely leak-proof. It has a tight-sealing Big Mouth screw top that's ultra-wide for adding things like ice or your hydration powder of choice. This piece also provides an incredible level of water flow that's up to 50% greater than the competition. Meanwhile, we gave the bottle a flexible, ergonomic design that grips to cages and fits easily in the hand, while the bottle's construction is made from BPA-free plastic that's 100% FDA food-grade approved. - Tight-sealing Big Mouth screw top is wide enough for ice cubes and powder drink mix. Wide water channel delivers 50% greater flow than other leading bottles. Plus, improved functional outside grip. - Updated MoFlo cap retains the same mechanism and delivers great flow. It's now easier to clean with a flush top and improved grip. 100% leak-free. - Easy to grip and more flexible than the original Little Big Mouth. - Also available in 24oz Big Mouth option. - BPA-free plastic made from 100% FDA food-grade materials and printed with non-solvent base (UV cured), CPSC-approved ink, and materials.

So you like to keep your rig running minimalist but practical? Maybe you prefer to tape a spare tube and CO2 to your frame to keep the profile and weight low? The Bandit is the best of both worlds in terms of simplicity and utility for mountain riders. Its compact form bolts under your SWAT-compatible saddle and features a simple Velcro strap with individual compartments for tube, CO2, and tire lever. One rip of the strap and you’re in, with easy to access everything you need to fix a flat in the middle of a race, when time is of the essence. - Tough, lightweight, water-resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts. - Individual compartments for a CO2 valve head, mountain tube, two-sided tire lever (included), and a 25g CO2 cartridge (not included) for compact and secure storage. - Tube, CO2 cartridge, and nozzle not included.

- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.

The Purist Fixy2.0 Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. The updated Fixy cap retains no push or pull of the mouthpiece, just aim and squeeze. Leak free Heart Valve™ with ergonomic mouthpiece design provides better mouthfeel. Redesigned grip pattern for a modernized look and ease of use. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design. - No push or pull is required to open and close the Heart ValveTM. - Easy-to-clean mouthpiece - Redesigned grip pattern for a modernized look and ease of use. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents.

The Purist Fixy Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design, even when the valve is open. - No push or pull is required to open and close the Heart Valve™. - Easy-to-clean mouthpiece - Ergonomic design of cap body provides easy grip. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials. - Available in 22oz and 26oz Purist Bottles.